Tel: 01404 892100


Bag holder for filling bag in box - 96366

Filling bags without a stand to hold the bag is very difficult. This bag holder/frame supports the collar of the 5, 10 & 20 litre bags (from bag in box) during filling, and includes a tap closing tool.

  • Supports the neck of 5, 10 & 20 litre bags (from bag in box)
  • With hinged hand-lever to close the tap of the bag - this is otherwise difficult to do by hand

NB We recommend that the support frame is screwed to a wooden base (full instructions supplied). In order to fill 20 litre bags the tool must be raised on the wooden base by between 60-65mm. Wood not supplied.

NB Bags must be filled using an accurate measuring vessel.

£25.20 ex VAT

In Stock
  • Screw holes in base to enable screwing to a wooden base (full instructions supplied for a simple wooden base - see below for materials required)
  • 'C' shaped holder to slot the lower flange of bag neck into
  • Hinged hand-ever to close the tap of the bag
  • Made from steel (electrostatically painted)
  • 41.5cm x 16cm x 7.5 cm high

Materials recommended for simple wooden base (not supplied):

  • 10mm plywood base of approximately 600mm x 300mm
  • Two wooden blocks, each approximately 60 x 40 x 200-300mm long
  • Screws


We have placed cookies on your computer to help make this website better. You can change your cookie settings through your browser at any time. Otherwise, we'll assume you're OK to continue. For more information see our Cookie Policy.