Speidel Hydropresses (original)

Stock Code: 91319

Back Order
£600.00 ex VAT

These hydropresses, are used in smaller vineyards and apple orchards to press small batches of grapes and apples and are manufactured by Speidel, internationally renowned manufacturers of high quality tanks for the wine & beverage industries for over 100 years.

Hydropresses give a gentle pressing, similar to that given by larger pneumatic wine presses. They can be used to press a range of fruit and vegetables (including rhubarb, berries and red/white currants) - see Application for list and fruit preparation requirements - and can also be used to press lees.

Hydro presses use mains pressure or pumped water to inflate the rubber bag inside the press. As the bag inflates it presses the fruit pulp against the slotted cylinder. The pressure applied and time pressing can be regulated by opening and closing the water tap.

  • Available in 40 and 90 litre capacities
  • Good juice yields even if partially filled
  • Stainless steel press cylinder, slotted (instead of perforated) for better yield
  • Enamelled cast aluminium alloy base & lid
  • Supplied with press bag & splash guard sack
  • Supplied with 1/2" hose connector & 75cm of clear braided hose (13mm / 1/2")

Suitable fruits:

  • Pome fruits (apples, pears, etc.)
  • Grapes
  • Berries
  • White & red currants

Other fruits/vegetables/foods which Speidel confirm can be used - please discuss with us before your purchase:

  • Rhubarb
  • Citrus fruit
  • Tomatoes
  • Honey
  • Marinated tobacco

Fruit should be prepared for pressing as follows:

  • Soft fruits such as grapes, berries and currants must be crushed to break the skins prior to pressing
  • Apples and pears must be milled

For advise on fruit preparation of the other fruits/vegetables/foods listed above, please ask us to confirm this.

40 litre Hyrdopress

  • Cylinder volume: 40 litres
  • Dimensions: Diameter 480mm x Height 900 mm
  • Weight: 18 kg
  • Outlet Height: 300 mm

90 litre Hyrdopress

  • Cylinder volume: 90 litres
  • Dimensions: Diameter: 590 x Height 1070 mm
  • Weight: 28 kg
  • Outlet Height: 300 mm

Both models

  • Maximum water pressure: 3 Bar
  • Fittings supplied: Geka hosetail & snap on/off 1/2" female connector
  • Included: 75cm of clear braided hose (13mm / 1/2") & hose tail

Our thanks to Old Tree Brewery for this video. Old Tree are an ecological brewery based in Brighton producing a unique range of small-batch, probiotic and celebration drinks.

Speidel: Speidel have been manufacturing high quality tanks for the wine & beverage industries for over 100 years. Speidel tanks are used by successful drink producers around the world. As Speidel's exclusive UK agents, Vigo has been supplying Speidel tanks since 1996. We also supply Speidel's Braumeister brewing systems. We ensure the right tank is chosen for each application and fitted with the correct accessories.

Quality
Speidel tanks are manufactured from high quality Outukumpu stainless steel. Outukumpu are global leaders of stainless steel production, were founded in 1910 and acquired ThyssenKrupp in 2012. The steel is manufactured to stringent German standards and is generally thicker than that found on cheaper brands of tank.

Easy Clean
Speidel’s innovative design and production methods produce tanks which are incredibly easy to clean:

  • Mirror finish (grade llld 2R) for chemical free cleaning, reducing labour costs, chemical costs and damage to the environment
  • Seamless moulding of panels, door opening and door, reducing welds, minimising dirt traps and tartrate crystal formation, while maintaining great strength
  • Continuous, smooth welds, minimising dirt traps and tartrate crystal formation

Special features
Click here to view more special features of Speidel tanks.

Guarantee
Speidel non-pressure stainless steel tanks up to and including 2000 mm diameter are guaranteed by Speidel for 25 years*, provided they are used indoors. Speidel pressure tanks do not apply to Speidel's 25 year guarantee due to the statutory requirements of the Pressure Equipment & Systems Regulations - please enquire for an explanation; a Speidel warranty provision of 2 years applies to pressure tanks. Terms and conditions apply to these guarantees - please contact us for full details.

(*) The Speidel 25 year guarantee does not apply to the following: tanks stored outside; tanks with a diameter in excess of 2000mm diameter; pressure tanks due to the statutory requirements of the Pressure Equipment & Systems Regulations - please enquire for an explanation. Depending on the tank type either Speidel's standard warranty provision applies or a special Speidel warranty applies. Please contact us for clarification.

Competitive Price
The price of Speidel tanks is surprisingly competitive for the level of quality.

Innovation
Speidel won the Vinitech Citation Innovation award for the design of their red wine mash plunger system, which ensures gentle processing, high colour and aroma extraction, low sludge content, and enables preset programming of immersion and interval times.

Environmentally Friendly Production
Speidel’s manufacturing facility in Germany is powered 100% from renewable sources, and production is 100% CO2 free.

Speidel brochures
To see the full range of Speidel tanks, download from here.

What we offer

  • As Speidel's exclusive UK agents of 20+ years, we give you qualified advice based on your specific requirements, helping you to choose the right tank for your application
  • We will give you a clear specification with a confirmed price
  • We ensure you are supplied with the correct tank fittings/accessories for your application, enabling you to start using your tank without delay
  • For bespoke tanks you will be supplied with tank drawings prior to manufacture for your peace of mind
  • We control your order from placement to the moment your tanks arrive on your site. so you don’t have to worry about sourcing freight and insurance
  • We can give advice on unloading your tanks from the lorry and subsequent handling
  • We are here for you throughout the lifespan of your tanks should you have any questions or need any advice

If temperature control of your product is required, we offer and install the Kreyer range of temperature control equipment, which work in conjunction with Speidel heating/cooling jackets, for accurate control of individual tank temperatures.

Contact Us
If you have any questions about Speidel tanks, please call us on 01404 892100 or email us at email us at sales@vigoltd.com.

We have placed cookies on your device to help make this website better.

Your order contains no items