Schneider Okoflow 3000 impeller pump

Stock Code: 93100

Back Order
£441.00 ex VAT

Impeller pumps are used for the rapid transfer of liquids, e.g., when pressing fruit, racking off after fermentation, and pumping from one tank or vessel to another. The Okoflow 3000 impeller pump is manufactured by Schneider Pumpen, who have over 70 years' experience manufacturing pumps. The Okoflow 3000 has a maximum capacity of 3000 litres per hour and is our best selling pump.

  • Maximum capacity 3000 litres per hour
  • Single/fixed speed pump
  • Machined solid nylon pump body
  • Neoprene impeller
  • Stainless steel impeller shaft
  • Easy to fit replacement impeller
  • Smooth and quiet running
  • Carrying handle
  • 5 metre cable with moulded UK plug
  • UK fitted thermal trip protection
  • 1” BSP male stainless steel thread connections, (supplied with 1” to 3⁄4” polypropylene hose tails and 2 x 30mm stainless steel hose clip) - please see the warning about hose fittings in the Specification below

NB Only flexible, reinforced hose should be used with this pump - our PVC braided hose is ideal (see below); please see the warning about hoses in the Specification below. Due to the construction of the pump body, this pump is not suitable for use with hoses of a greater diameter than 25mm (1") Ø. Please see the TSB impeller pumps, Phoenix 6,000 pumps or Phoenix 12,000 pumps if you intend to use these hoses.

NB Designed to handle liquids up to 40ºC - impellers to handle higher temperatures (and oils) are available on request.

Impeller pumps are used for the rapid transfer of liquids, when pressing, raking off and pumping from one tank to another. They are suitable for free-running liquids and liquids with some small solids in suspension. They are not generally suitable for use with filters unless the pump has a precise variable speed control - this pump doesn't have variable speed control.

  • Maximum ABV: 15%

The Case Studies below are a small sample of the hundreds of Okoflow pumps we have supplied:

Tutts Clump Cider

Chiltern Ridge

Little Stour Orchard

  • Model: Okoflow
  • Flow rate: 3000 litres per hour
  • Maximum ABV: 15%
  • Rated to IP54
  • Voltage: 230 V
  • Motor: 0.37 kW
  • Weight: 12 kg

This pump body will crack if the hose fittings are attached with too much PTFE tape. It is advised to use a liquid type sealant (e.g., Double Bubble etc).
This pump is not suitable for use with hoses that will add excessive weight to the pump body. Flexible hoses like our clear braided PVC hoses (see below) should only be used, as these are flexible and do not add undue stress to the pump body. Undue stress to the pump body will cause it to crack.
Failure to follow the advise above will invalidate the warranty.
We can fit the hose connections but at additional cost - please call us on 01404 892 100

Vigo are UK agent for Schneider Pumpen GmbH, who in 1948 began specialising in manufacturing pumps for the wine industry. We have been supplying Theo Schneider's distinctive orange pumps for decades; in fact the "orange pump brand" is referred to more frequently by customers (not only in the UK, but in many other countries too) more than than the Schneider brand name!

We chose Schneider because:

  • They have over 70 years' experience in the design, manufacture of pumps for wine industry, however, the origins of their company date back to 1920

  • Their pumps are also suitable for many other drink applications/industries

  • Their aim is to supply the right pump for the right application and their focus during design is the consistency, viscosity, weight of the product; the pressures required; the protective features required (e.g., guarding against overpressure, etc.); and hydrodynamic and volumetric considerations.
  • Their pumps are manufactured to a high standard and designed for ease of use, efficiency and low maintenance

  • They are a solid and committed family-run company

    The Schneider range includes:

    • Impeller pumps

    • Centrifugal pumps

    • Eccentric screw pumps

    • Stirrers (rousers)

    What we can offer

    In partnership with Schneider, we can offer you:

    • Advice on the appropriate pump for you

    • Comprehensive 12 month warranty, backed up by Vigo engineers

    • Full technical backup and support from our mobile engineers

    Please call us on 01404 892100 to talk about Schneider pumps.

We have placed cookies on your device to help make this website better.

Your order contains no items