Steam generators

Steam is the most effective method for sterilisation of filtration* and bottling equipment prior to sterile bottling.

  • Produces continuous steam within one minute of switching on, up to a maximum pressure of 2.5 bar
  • Stainless steel case, mounted on wheels
  • 5 metre cable
  • 3 metres of hose and all connections are included
  • Various models are available - see Specification.

NB The single phase version (TD9) will require hard-wiring (on-site) to an isolator by a suitably qualified electrician, therefore it is not supplied with a plug.

(*) N.B. Not all plastic filter plates are suitable for steaming: noryl (fitted as standard to our Vigo 40 x 40cm Sheet Filters - part code 95165, etc.) can be steamed, moplen should not be steamed.

Please call us on 01404 892100 to discuss these steamers.

 

Please see the Filters category in Catalogue for our full range of filters.

Please see the Fillers category in Catalogue for our full range of filling machines.

 

 

Specification

Single or 3 phase TD9 steam generator

  • Power: 9.9 kW
  • Voltage: 230 or 400 V
  • Steam production: 15 kg per hour
  • Dimensions: Length 750 x Width 310 x Height 680 mm
  • Weight: 50 kg
  • NB The single phase version (TD9) will require hard-wiring (on-site) to an isolator by a suitably qualified electrician, therefore it is not supplied with a plug.

TD13 steam generator

  • Power: 13.2 kW
  • Voltage: 400 V
  • Steam production: 20 kg per hour
  • Dimensions: Length 750 x Width 310 x Height 680 mm
  • Weight: 55 kg

TD16 steam generator

  • Power: 16.5 kW
  • Voltage: 400 V
  • Steam production: 25 kg per hour
  • Dimensions: Length 750 x Width 310 x Height 680 mm
  • Weight: 60 kg

TD23 steam generator

  • Power: 23.1 kW
  • Voltage: 400 V
  • Steam production: 35 kg per hour
  • Dimensions: Length 850 x Width 310 x Height 680 mm
  • Weight: 75 kg

 

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

(0.750 secs)