3 head benchtop gravity filler

Application

Suitable for filling still non-viscous products, with the exceptions below:

• NB These fillers are not suitable for beer. If you wish to fill bottles with bottle conditioned beer, please view our range of syphon fillers
• NB These fillers are not suitable for dairy products

Bottle information:

• Standard nozzles have an outer diameter of 14mm which is suitable for most conventional bottle types (12mm nozzles are available on request for narrow mouth bottles and 16mm nozzles for faster filling of large volume containers)
• Suitable for use with bottles from 200ml to 5 litres capacity, including plastic cider flagons with mouth diameters of up to 35mm

Features

• 3 head gravity feed filler suitable for still products
• Bench-top model
• Filling capacity of up to 110 litres per hour per nozzle (depending on operator, bottle size and product being filled)
• Stainless steel construction
• Seamless, one-piece float tank fitted with lid
• Filler nozzles with ball joint mounting to facilitate location and removal of bottles
• Side discharge outlets to reduce product splashing
• Air escape tubes venting above the product level in the float tank.
• Can be steam cleaned to 110ºC

Specification

• 3 filling nozzles
• Filling capacity of up to 110 litres per hour per nozzle (depending on operator, bottle size and product being filled)
• 3/4“ BSP product inlet connection
• Dimensions: Width 420 x Depth 440 x Height 970 mm