4 head gravity filler

RefNameStockPriceQty
963174 head gravity filler

Live Stock Unavailable

In stock

Back Order

£1197.00 ex. VAT

These gravity feed fillers allow you to fill bottles with still products quickly and easily, with an accurate and consistent fill level. This 4 head machine is very simple to operate, and the fill level is easily adjusted.

  • 4 nozzle
  • Filling capacity of up to 110 litres per hour per nozzle (depending on operator, bottle size and product being filled)
  • Can be fed either from a header tank or directly from a centrifugal pump fitted with a bypass
  • Stainless steel construction
  • Floor standing version, as opposed to benchtop

See Application below for suitable products, bottle types and capacities.

N.B. These fillers are not suitable for beer or dairy products. See Application below.

Application

Suitable for filling still non-viscous products, with the exceptions below:
  • NB These fillers are not suitable for beer. If you wish to fill bottles with bottle conditioned beer, please view our range of syphon fillers
  • NB These fillers are not suitable for dairy products
  • Bottle information:
  • Standard nozzles have an outer diameter of 14mm which is suitable for most conventional bottle types (12mm nozzles are available on request for narrow mouth bottles and 16mm nozzles for faster filling of large volume containers)
  • Suitable for use with bottles from 200ml to 5 litres capacity, including plastic cider flagons with mouth diameters of up to 35mm
  • Features

  • 4 head gravity feed filler suitable for still products
  • Floor standing model (as opposed to bench-top)
  • Filling capacity of up to 110 litres per hour per nozzle (depending on operator, bottle size and product being filled)
  • Stainless steel construction
  • Seamless, one-piece float tank fitted with lid
  • Filler nozzles with ball joint mounting to facilitate location and removal of bottles
  • Side discharge outlets to reduce product splashing
  • Air escape tubes venting above the product level in the float tank.
  • Can be steam cleaned to 110ºC
  • Specification

  • 4 filling nozzles
  • Filling capacity of up to 110 litres per hour per nozzle (depending on operator, bottle size and product being filled)
  • 3/4“ BSP product inlet connection
  • Dimensions: Width 420 x Depth 440 x Height 1450 mm
  • This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

    New Website - Login Information

    Welcome to our new website! It looks the same as our old one but connects to our new accounts system.

    If you had a login to our previous website, you will need to use the new password which we emailed to you on 3rd August 2022. If you haven't received this email, please check your Junk folder, or call us on 01404 892 100.

    Thank you for visiting.

    (0.535 secs)