• Cap tightening chuck for MCA2 screw caps
  • 85090 2

Cap tightening chuck for MCA2 screw caps

RefNameStockPriceQty
85090Cap tightening chuck for MCA2 screw caps

Live Stock Unavailable

In stock

Back Order

£525.00 ex. VAT

This chuck can be fitted to a wide range of pneumatic/electric screwdrivers (screwdriver not supplied by us) for tightening the 28mm MCA2 thread plastic caps we supply onto 28mm (MCA3) thread bottles.

  • Help reduce the risk of repetitive strain from hand application of MCA2 screw caps
  • Stainless steel

Pneumatic/electric screwdriver requirements:

  • The chuck is supplied with a standard ¼" hex fitting for compatibility with a wide range of screwdrivers
  • A screwdriver with adjustable torque control is required - please note the recommended torque value for our 28mm MCA2 caps is 11-13 In. lbs

Please note, the lead time for this chuck is approximately 4 weeks from order confirmation.

NB The additional image shows the chuck mounted in a pneumatic screwdriver (not included, not supplied by us) and suspended by the Counter Balance Spring Return (part code 21900 - not included, available separately)

 

Use with our Plastic MCA2 Tamper Evident Screw Caps (part code 98786, etc...), available separately.

 

Please see the Cappers category in Catalogue for our full range of capping machines.

[Did you know that our sister company, Rawlings, supplies bottles? See Glass Packaging]

Application

Compatible with a wide range of pneumatic/electric screwdrivers:

  • The chuck is supplied with a standard ¼” hex fitting for compatibility with a wide range of screwdrivers
  • A screwdriver with adjustable torque control is required (not supplied by us) - please note the recommended torque value for our 28mm MCA2 caps is 11-13 In. lbs
  • NB Our Counter Balance Spring Return - product code 21900 - can be used to suspend the screwdriver

Suitable for the following caps:

  • Plastic MCA2 28mm tamper evident screw caps

 

Specification

  • Stainless steel chuck for 28mm MCA2 thread plastic caps
  • Supplied with a standard ¼” hex fitting for compatibility with a wide range of screwdrivers

 

YouTube

IMPORTANT NOTICE: Please note, the video shows a chuck being used with a pneumatic screwdriver and counter balance spring return. We don't supply the screwdriver.

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

New Website - Login Information

Welcome to our new website, launched 3rd August 2022! It looks the same as our old one but connects to our new accounts system.

If you wish to order online, please observe the following ...

  • If you had a login to our old website and this is your first time logging in to this new website: In order to link up with your existing account record on our system, you will need to 'Log in' using the temporary password we emailed to you on 3rd August 2022. If you don't think you have received this, please check your Junk/Spam folder. If you can't trace this email and/or are having problems logging in, please call us on 01404 892 100.
  • If you haven't ordered online with us before (i.e., you didn't have a web login): Please 'Register' online via this page.
  • If you have a login for this (new) website, simply 'Log in' - please note, if you have forgotten your password, click on the 'Forgotten your password' link above the Log In button.

Thank you for visiting.

(0.578 secs)