4 head benchtop gravity filler

Stock Code: 96308

Quantity

Back Order

£1,113.00 ex VAT

These gravity fillers allow you to fill bottles with still products quickly and easily, with an accurate and consistent fill level. This 4 head machine is very simple to operate, and the fill level is easily adjusted.

4 nozzle
Filling capacity of up to 110 litres per hour per nozzle (depending on operator, bottle size and product being filled)
Can be fed either from a header tank or directly from a centrifugal pump fitted with a bypass
Stainless steel construction
Bench-top version

See Application below for suitable products, bottle types and capacities.

Application
Case Studies
Features
Specification
Prices

Suitable for filling still non-viscous products, with the exceptions below:

NB These fillers are not suitable for beer. If you wish to fill bottles with bottle conditioned beer, please view our range of syphon fillers
NB These fillers are not suitable for dairy products

Bottle information:

Standard nozzles have an outer diameter of 14mm which is suitable for most conventional bottle types (12mm nozzles are available on request for narrow mouth bottles and 16mm nozzles for faster filling of large volume containers)
Suitable for use with bottles from 200ml to 5 litres capacity, including plastic cider flagons with mouth diameters of up to 35mm

The Case Studies below represent a tiny sample of the gravity fillers we have supplied:

Drovers Hill Farm

Marlings Vineyard

4 head gravity feed filler suitable for still products
Bench-top model
Filling capacity of up to 110 litres per hour per nozzle (depending on operator, bottle size and product being filled)
Stainless steel construction
Seamless, one-piece float tanks fitted with lid
Filler nozzles with ball joint mounting to facilitate location and removal of bottles
Side discharge outlets to reduce product splashing
Air escape tubes venting above the product level in the float tank.
Can be steam cleaned to 110ºC

4 filling nozzles
Filling capacity of up to 110 litres per hour per nozzle (depending on operator, bottle size and product being filled)
3/4“ BSP product inlet connection
Dimensions: Width 420 x Depth 440 x Height 970 mm