6 head gravity filler

RefNameStockPriceQty
963096 head gravity filler

Live Stock Unavailable

In stock

Back Order

£1785.00 ex. VAT

These gravity fillers allow you to fill bottles with still products quickly and easily, with an accurate and consistent fill level. This 6 head machine is very simple to operate, and the fill level is easily adjusted.

  • 6 nozzle
  • Filling capacity of up to 110 litres per hour per nozzle (depending on operator, bottle size and product being filled)
  • Can be fed either from a header tank or directly from a centrifugal pump fitted with a bypass
  • Stainless steel construction
  • Floor standing version, as opposed to benchtop

See Application below for suitable products, bottle types and capacities.

N.B. These fillers are not suitable for beer nor dairy products. See Application below.

 

NB You can order spares online for these fillers - please see the Spares category in Catalogue and Refine by 'Type'.

Please see Closures for our range of caps and corks for glass bottles.

Please see the Fillers category in Catalogue for our full range of filling machines.

[Did you know that our sister company, Rawlings, supplies bottles? See Glass Packaging]

Application

Suitable for filling still non-viscous products, with the exceptions below:

  • NB These fillers are not suitable for beer. If you wish to fill bottles with bottle conditioned beer, please view our range of syphon fillers
  • NB These fillers are not suitable for dairy products

Bottle information:

  • Standard nozzles have an outer diameter of 14mm which is suitable for most conventional bottle types (12mm nozzles are available on request for narrow mouth bottles and 16mm nozzles for faster filling of large volume containers)
  • Suitable for use with bottles from 200ml to 5 litres capacity, including plastic cider flagons with mouth diameters of up to 35mm

 

Features

  • 6 head gravity feed filler suitable for still products
  • Floor standing version (as opposed to bench-top)
  • Filling capacity of up to 110 litres per hour per nozzle (depending on operator, bottle size and product being filled)
  • Stainless steel construction
  • 2 x Seamless, one-piece float tanks fitted with lid
  • Filler nozzles with ball joint mounting to facilitate location and removal of bottles
  • Side discharge outlets to reduce product splashing
  • Air escape tubes venting above the product level in the float tank.
  • Can be steam cleaned to 110ºC

 

Specification

  • 6 filling nozzles
  • Filling capacity of up to 110 litres per hour per nozzle (depending on operator, bottle size and product being filled)
  • 2 x float tanks with lids
  • 3/4“ BSP product inlet connection
  • Dimensions: Width 890 x Depth 440 x Height 1450 mm

 

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

New Website - Login Information

Welcome to our new website, launched 3rd August 2022! It looks the same as our old one but connects to our new accounts system.

If you wish to order online, please observe the following ...

  • If you had a login to our old website and this is your first time logging in to this new website: In order to link up with your existing account record on our system, you will need to 'Log in' using the temporary password we emailed to you on 3rd August 2022. If you don't think you have received this, please check your Junk/Spam folder. If you can't trace this email and/or are having problems logging in, please call us on 01404 892 100.
  • If you haven't ordered online with us before (i.e., you didn't have a web login): Please 'Register' online via this page.
  • If you have a login for this (new) website, simply 'Log in' - please note, if you have forgotten your password, click on the 'Forgotten your password' link above the Log In button.

Thank you for visiting.

(0.512 secs)