Schneider Okoflow 3000 impeller pump

93100Schneider Okoflow 3000 impeller pump

Live Stock Unavailable

In stock

Back Order

£467.50 ex. VAT

Impeller pumps are used for the rapid transfer of liquids, e.g., when pressing fruit, racking off after fermentation, and pumping from one tank or vessel to another. The Okoflow 3000 impeller pump is manufactured by Schneider Pumpen, who have over 70 years' experience manufacturing pumps. The Okoflow 3000 has a maximum capacity of 3000 litres per hour and is our best selling pump.

  • Maximum capacity 3000 litres per hour
  • Single/fixed speed pump
  • Machined solid nylon pump body
  • Neoprene impeller
  • Stainless steel impeller shaft
  • Easy to fit replacement impeller
  • Smooth and quiet running
  • Carrying handle
  • 5 metre cable with moulded UK plug
  • UK fitted thermal trip protection
  • 1" BSP male stainless steel thread connections, (supplied with 1" to 3/4" polypropylene hose tails and 2 x 30mm stainless steel hose clip) - please see the warning about hose fittings in the Specification below

NB Only flexible, reinforced hose should be used with this pump - our PVC braided hose is ideal (see below); please see the warning about hoses in the Specification below. Due to the construction of the pump body, this pump is not suitable for use with hoses of a greater diameter than 25mm (1"). Please see the TSB impeller pumps, Phoenix 6,000 pumps or Phoenix 12,000 pumps if you intend to use these hoses.

NB Designed to handle liquids up to 40 degree C - impellers to handle higher temperatures (and oils) are available on request.


Impeller pumps are used for the rapid transfer of liquids, when pressing, raking off and pumping from one tank to another. They are suitable for free-running liquids and liquids with some small solids in suspension. They are not generally suitable for use with filters unless the pump has a precise variable speed control - this pump doesn't have variable speed control.

  • Maximum ABV: 15%



  • Model: Okoflow
  • Flow rate: 3000 litres per hour
  • Maximum ABV: 15%
  • Rated to IP54
  • Voltage: 230 V
  • Motor: 0.37 kW
  • Weight: 12 kg

This pump body will crack if the hose fittings are attached with too much PTFE tape. It is advised to use a liquid type sealant (e.g., Double Bubble etc).
This pump is not suitable for use with hoses that will add excessive weight to the pump body. Flexible hoses like our clear braided PVC hoses (see below) should only be used, as these are flexible and do not add undue stress to the pump body. Undue stress to the pump body will cause it to crack.
Failure to follow the advise above will invalidate the warranty.

We can fit the hose connections but at additional cost - please call us on 01404 892 100


This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

New Website - Login Information

Welcome to our new website! It looks the same as our old one but connects to our new accounts system.

If you had a login to our previous website, you will need to use the new password which we emailed to you on 3rd August 2022. If you haven't received this email, please check your Junk folder, or call us on 01404 892 100.

Thank you for visiting.

(0.543 secs)