• 40 litre stainless steel hydropress
  • 91325 2
  • 91325 3
  • 91325 4
  • 91325 5
  • Shown in use
  • Shown in use
  • Shown in use

Speidel Hydropresses (stainless steel)

9132540 litre stainless steel hydropress

Live Stock Unavailable

In stock

Back Order

£685.00 ex. VAT

9134490 litre stainless steel hydropress

Live Stock Unavailable

In stock

Back Order

£995.00 ex. VAT

These hydropresses, are used in smaller vineyards and apple orchards to press small batches of grapes and apples, and are manufactured by Speidel, internationally renowned manufacturers of high quality tanks for the wine & beverage industries for over 100 years. This hydropress is the latest stainless steel version from Speidel.

Hydropresses give a gentle pressing, similar to that given by larger pneumatic wine presses. They can be used to press a range of fruit and vegetables (including rhubarb, berries and red/white currants) - see Application for list and fruit preparation requirements - and can also be used to press lees.

Hydro presses use mains pressure or pumped water to inflate the rubber bag inside the press. As the bag inflates it presses the fruit pulp against the slotted cylinder. The pressure applied and time pressing can be regulated by opening and closing the water tap.

  • 40 & 90 litre models available
  • Good juice yields even if partially filled
  • Slotted cylinder (instead of perforated) for better yield
  • Includes press bag & splash guard
  • Supplied with 1/2" hose connector & 75cm of clear braided hose (13mm / 1/2")



Suitable fruits:

  • Pome fruits (apples, pears, etc.)
  • Grapes
  • Berries
  • White & red currants

Other fruits/vegetables/foods which Speidel confirm can be used - if you intend to press these please discuss with us before your purchase:

  • Rhubarb
  • Citrus fruit
  • Tomatoes
  • Honey
  • Marinated tobacco

Fruit should be prepared for pressing as follows:

  • Soft fruits such as grapes, berries and currants must be crushed to break the skins prior to pressing
  • Apples and pears must be milled
  • For advise on fruit preparation of the other fruits/vegetables/foods listed above, please ask us to confirm this.



  • Includes press bag & splash guard
  • Maximum water pressure: 3 Bar
  • Fittings supplied: Geka hosetail & snap on/off 1/2" female connector
  • Included: 75cm of clear braided hose (13mm / 1/2") & hose tail

40 litre model:

  • Cylinder volume: 40 litres
  • Dimensions: Diameter 520mm x Height 920mm
  • Outlet height: 310mm
  • Weight: 20kg

90 litre model:

  • Cylinder volume: 90 litres
  • Dimensions: Diameter 620mm x Height 1040mm
  • Outlet height: 320mm
  • Weight: 33kg



NB: This video shows the painted steel version of Hydropress in action Our thanks to Old Tree Brewery for this video. Old Tree are an ecological brewery based in Brighton producing a unique range of small-batch, probiotic and celebration drinks.


Speidel Tank-und Behälterbau GmbH are globally renowned tank manufacturers. They have been manufacturing high quality beverage tanks for over 100 years. Speidel tanks are used by successful wineries and drink producers around the world and we are proud to be their UK agents.

Here are some of the reasons why we choose Speidel for stainless steel beverage tanks:

The Stainless Steel

Speidel tanks are manufactured from high specification Outukumpu stainless steel. Outukumpu are global leaders of stainless steel production, were founded in 1910 and acquired ThyssenKrupp in 2012. The steel is manufactured to stringent German standards and is generally thicker than that found on cheaper brands of tank.

Easy Clean Features

Speidel’s innovative in-house design and in-house high-tech production methods result in tanks which are incredibly easy to clean: * Mirror finish (certified grade llld 2R) for chemical free cleaning, reducing labour costs, chemical costs and damage to the environment* Seamless moulding of panels, door opening and door, reducing welds, minimising dirt traps and tartrate crystal formation, while maintaining great strength * Continuous, smooth welds, minimising dirt traps and tartrate crystal formation Watch the Speidel Tank Advantages video here.

Made in Germany

As Speidel state 'for us "Made in Germany" is not just an empty phrase, but a lived principle'. They manufacture their tanks exclusively at their high-tech factory in Ofterdingen, Swabia/Germany and their tanks are designed to last a lifetime when treated correctly. They use certified high specification stainless steel (as above), impeccable production methods (as above) and have a highly trained production crew.


Speidel non-pressure stainless steel tanks up to and including 2000 mm diameter are guaranteed by Speidel for 25 years. *NB conditions apply, i.e., one of which is that the tanks must be stored indoors; please contact us for clarification and more information.*

Competitive Price

The price of Speidel tanks is surprisingly competitive for the level of quality.


Speidel won the Vinitech Citation Innovation award for the design of their red wine mash plunger system, which ensures gentle processing, high colour and aroma extraction, low sludge content, and enables preset programming of immersion and interval times.


Speidel generate 25% of their energy needs on-site via their photovoltaic system, which enables them to avoid approximately 270 tons of COâ‚‚ annually. The remaining 75% is powered by 100% COâ‚‚-free green electricity. As a result, there are no COâ‚‚ emissions for the production of a Speidel tank.


Download our Speidel flier here. Access the Speidel catalogues here.

What we offer...

As Speidel's exclusive UK agents, we have been supplying Speidel tanks since 1996. * We give you qualified advice based on your specific requirements, helping you to choose the right tank for your application * We will give you a clear specification with a confirmed price * We ensure you are supplied with the correct tank fittings/accessories for your application, enabling you to start using your tank without delay * For bespoke tanks you will be supplied with tank drawings prior to manufacture for your peace of mind * If you need to kit out a complete cellar with tanks, in conjunction with Speidel we can provide cellar layout diagrams* If temperature control/chilling of your product is required, we offer and install the Kreyer range of temperature control e

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

New Website - Login Information

Welcome to our new website! It looks the same as our old one but connects to our new accounts system.

If you had a login to our previous website, you will need to use the new password which we emailed to you on 3rd August 2022. If you haven't received this email, please check your Junk folder, or call us on 01404 892 100.

Thank you for visiting.

(0.855 secs)